Polk-audio SurroundBar 400 Component Home Theater Speaker Bar Manuel d'utilisateur télécharger pdf (Page 13)

Connect your SurroundBar 500 CHT or 400 CHT system

to your surround sound receiver/processor referring to

the hookup instructions on pages 6 - 10.

Do not use the “Auto Setup” feature if it is included in your

receiver. Because the SurroundBar produces surround sound

from a single front-mounted speaker, the auto setup feature

will not operate properly.

SET YOUR RECEIVER’S “SPEAKER SET-UP MENU”

For best music and movie sound quality performance

in typical rooms:

1. Connect a single RCA cable from the “SUBOUT” of your

receiver to the LFE input of the subwoofer. This connecting

method bypasses the subwoofer’s internal filter and relies

on the filter built into your receiver.

NOTE: Make no other signal connections. Do not use speaker

wire to make the connection to the subwoofer.

2. In your receiver’s Speaker Set-up Menu,

set subwoofer to “YES.”

3. Set the subwoofer crossover frequency to 100Hz.

NOTE: For high listening levels in large rooms

set crossover frequency to 150Hz or higher.

4. Set Left and Right speaker channels to “SMALL.”

5. Set Center and Surround channels to “SMALL.”

6. In the receiver’s “Speaker Distance” Set-up Menu, select

the same distance for all channels corresponding to the

distance of the primary seating area to the loudspeaker.

If your receiver or processor uses a “channel delay”

setup function that requires a delay-time entry, use

the minimum setting (in milliseconds) that it allows

for the center and surround channels.

7. Surround Sound settings: Dolby

Digital or DTS on all 5.1

channel programming; DTS-HD, Dolby Digital EX or Dolby

Digital PLIIx for all 7.1 channel programming.

Note: For 2 channel sources such as stereo music and some

television programs, you may wish to use Dolby PLIIx or PLII.

These processing algorithms deliver 7.1 and 5.1 surround

sound from stereo content.

Set Channel Levels:

1. Set Front Left, Center and Front Right to “Zero” (0dB).

. Set Surround Left and Surround Right levels to a minimum

of +3dB. Don’t hesitate to set to +6dB or higher depending

on the listening environment, the program material and

your personal taste.

3. For a 7.1 system, set Surround Back Left and Surround

Back Right surround levels to 0dB or 3dB lower than

Surround Left and Surround Right levels.

4. Adjust channel levels to suit your listening environment,

the program material and your personal taste. If you find

TV/movie dialogue hard to understand, increase the center

channel level to your liking.

To Contact Customer Service/Technical Support:

If you have a question or comment, please feel free

to call us or email us. In the US and Canada, call Polk Audio

Customer Service: 800-377-7655 (M-F 9-5:30 EST) or via email

polkcs@polkaudio.com. Outside the US, call +1 410-358-3600.

SURROUNDBAR SPEAKER SET-UP

Customer Service Hours of Operation: Monday-Friday, 9AM-5:30PM EST polkcs@polkaudio.com 13

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 39 40

Commentaires sur ces manuels

Pas de commentaire

Polk-audio SurroundBar 400 Component Home Theater Speaker Bar Manuel d'utilisateur Page 13

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de cinéma à domicile Polk-audio SurroundBar 400 Component Home Theater Speaker Bar